• REGULATOR •• CEILING FAN OWNER'S MANUAL • WARNING: Read and follow these instructions carefully and be mindful of all warnings shown throughout
9INSTALLATION OF DETACHABLE SWITCH HOUSING MOUNTING HUB1. Remove one of the three screws on the mounting hub located on the fan motor.2. Loosen the ot
INSTALLING THE REMOVABLE SWITCH HOUSINGNOTE: Be sure the power is off before installing.NOTE: Be sure the power is off before installing.1. Loosen the
OPERATIONTurn on the power and check operation of the fan. The fan is controlled by the use of the pull chain as follows: one pull = high speed
CARE AND CLEANINGPeriodically it may be necessary to re-tighten blade to blade arm screws or blade arm to motor screws to prevent clicking or humming
GENERAL INSTALLATION & OPERATION INSTRUCTIONSIMPORTANT SAFEGUARDS:1. To ensure the success of the installation, be sure to read the instruction
IMPORTANT SAFETY PRECAUTIONS• Disconnect power by removing fuse or turning off circuit breaker before installing the fan and/or optional lighting.Disc
UNPACKING YOUR FAN1. Unpack your fan and check the contents. Do not discard the carton. If warranty replacement or repair is ever necessary, the fan s
PREPARATIONPREPARATION:Verify you have all parts before beginning the installation. Check foam insert closely for missing parts. Remove motor from pac
5INSTALLING THE MOUNTING BRACKET AND HANGING BRACKETFig. 1Flat washersHanger bracketSpring washersHex nutsMountingbracketCaution:Caution: To avoid po
INSTALLING THE FAN1. Carefully support fan body (motor) in its styrofoam packing with the mounting collar (where the wires come out) facing upward.2.
INSTALLING THE FAN CONTINUEDELECTRICAL CONNECTIONSWARNING:WARNING: To avoid damaging the blade arms and blades, do not install them onto fan until fan
FINISHING THE INSTALLATIONBLADE ATTACHMENT1. Tuck connections neatly into ceiling outlet box.2. Slide the canopy up to ceiling and over the 2 screws o
Comments to this Manuals